100 kg Induction Furnace for Sale

100 kg Induction Furnace for Sale

Series line constant power (energy-saving 100kg induction furnace for sale)

The constant power (series energy-saving type) 100 kg induction furnace was launched for sale. After a long-term production practice tests, it has been widely praised by users. Now it has been improved on the original basis to make its performance more excellent.

<1> High melting rate. During the melting process, the power can be kept running in the best frequency band, which greatly eliminates the adverse effect of the new lining on the melting speed.

〈2〉The quality of molten steel is high, and the yield of castings is high.

<3> High power factor. During the operation of the whole machine, the power factor can reach more than 0.97.

<4> No interference to the power grid.

<5> Low power consumption, more than 10% power saving.

<6> The success rate of starting is high, and the success rate of starting is 100% under any load.

<7>The main control board adopts a connector interface, which is more convenient for maintenance.

<8> The inverter uses series thyristors to minimize the damage rate of thyristors.

Series inverter circuit

The series inverter power supply put into the market is a high-efficiency frequency conversion device, which is suitable for heating, diathermy, surface annealing, quenching, pipe bending, smelting, etc. Its advantages are:

<1> The current flowing through the inductor in the series inverter circuit is close to the active current, so the DC current is small and the loss is small.

<2>Easy to start, simple and reliable, suitable for frequent starting occasions.

<3>The current naturally crosses zero and is easy to shut down, so the operating frequency is higher.

Technical Parameter of 100 kg Induction Furnace for Sale

SN	Name	Unit	GW-0.05	GW-0.1	GW-0.15	GW-0.20
1	Electric Furnace Rated Capacity	Kilogram	50	100	150	200
2	Rated power of intermediate frequency power supply	kilowatt	80	100	120	160
3	Incoming line voltage of intermediate frequency power supply	Volt	380	380	380	380
4	Melting furnace frequency	Hertz	1000
5	Melting rate	Ton/hour	0.04	0.1	0.13	0.16
6	Power consumption (stainless steel)	Degree/ton	720	700	700	680
7	Power consumption (cast iron and carbon steel)	Degree/ton	650	640	620	600
8	Complete equipment water consumption	Ton/hour	7	7	7	7
9	Melting time	Minute	30	30	30	30
10	Induction coil rated voltage	Volt	1000	1000	1000	1000
11	Furnace rated temperature	°C	1600	1600	1600	1600
12	Transformer rated capacity	KVA	100	100	160	200