100 kg Induction Furnace for Sale

Series line constant power (energy-saving 100kg induction furnace for sale)

The constant power (series energy-saving type) 100 kg induction furnace was launched for sale. After a long-term production practice tests, it has been widely praised by users. Now it has been improved on the original basis to make its performance more excellent.

<1> High melting rate. During the melting process, the power can be kept running in the best frequency band, which greatly eliminates the adverse effect of the new lining on the melting speed.

〈2〉The quality of molten steel is high, and the yield of castings is high.

<3> High power factor. During the operation of the whole machine, the power factor can reach more than 0.97.

<4> No interference to the power grid.

<5> Low power consumption, more than 10% power saving.

<6> The success rate of starting is high, and the success rate of starting is 100% under any load.

<7>The main control board adopts a connector interface, which is more convenient for maintenance.

<8> The inverter uses series thyristors to minimize the damage rate of thyristors.

Series inverter circuit

The series inverter power supply put into the market is a high-efficiency frequency conversion device, which is suitable for heating, diathermy, surface annealing, quenching, pipe bending, smelting, etc. Its advantages are:

<1> The current flowing through the inductor in the series inverter circuit is close to the active current, so the DC current is small and the loss is small.

<2>Easy to start, simple and reliable, suitable for frequent starting occasions.

<3>The current naturally crosses zero and is easy to shut down, so the operating frequency is higher.

Technical Parameter of 100 kg Induction Furnace for Sale

SN	Name	Unit	GW-0.05	GW-0.1	GW-0.15	GW-0.20
1	Electric Furnace Rated Capacity	Kilogram	50	100	150	200
2	Rated power of intermediate frequency power supply	kilowatt	80	100	120	160
3	Incoming line voltage of intermediate frequency power supply	Volt	380	380	380	380
4	Melting furnace frequency	Hertz	1000
5	Melting rate	Ton/hour	0.04	0.1	0.13	0.16
6	Power consumption (stainless steel)	Degree/ton	720	700	700	680
7	Power consumption (cast iron and carbon steel)	Degree/ton	650	640	620	600
8	Complete equipment water consumption	Ton/hour	7	7	7	7
9	Melting time	Minute	30	30	30	30
10	Induction coil rated voltage	Volt	1000	1000	1000	1000
11	Furnace rated temperature	°C	1600	1600	1600	1600
12	Transformer rated capacity	KVA	100	100	160	200

此博客中的热门博文

Application Range of Medium Frequency Induction Furnace

Application Range of Medium Frequency Induction Furnace (1) Intermediate frequency induction furnace is used for forging and rolling 1. Wheel forgings, ring forgings, shaft forgings, cylinder forgings, gear forgings, stainless steel forgings, and large flanges. 2. Hot heading of standard parts and fasteners, such as heating for tempering, forging, and extrusion of high tools. 4. Quenching and tempering of bar materials (2) Intermediate frequency induction furnaces are used for smelting 　 Including the smelting of steel, gold, silver, copper, and aluminum, especially in the foundry industry (3) Intermediate frequency induction furnace is used for heat treatment 1. Heat treatment of various hardware tools and hand tools. Such as pliers, wrenches, screwdrivers, hammers, axes, etc. 2. High-frequency hardened crank pins, sprockets, camshafts, valves, various rocker arms, rocker shafts for various auto parts and motorcycle parts; various gears, spline shafts, transmission axles, High-f...

阅读全文

Induction Furnace Voltage

Induction Furnace Voltage The induced voltage of the intermediate frequency furnace often exists on the inductor coil, the furnace mouth plate, the water-cooled guide rail, and the furnace body bracket. So, what is the reason for the induction voltage of the induction furnace? Next, we will talk about the induced voltage of the intermediate frequency furnace. When the induction coil of the intermediate frequency furnace is working, when an alternating current passes through the coil, an alternating magnetic field is established in the space around the coil. An induced electromotive force is generated in the metal blank in the alternating magnetic field. We often regard the blank as a closed circuit with only one turn of the coil. When the induced electromotive force is generated, an alternating self-circulating circulating current—eddy current is generated in the circuit. Induction heating is to use the heat energy generated by this eddy current to heat the metal blank. The water-cool...

阅读全文

Troubleshooting of Medium Frequency Furnace

Troubleshooting of Medium Frequency Furnace This article introduces the faults and solutions of medium frequency furnace. 1. Fault phenomenon: large DC current, low DC voltage, and if the voltage, dull equipment sound, over-current protection. Analysis and treatment: the thyristor with one arm of the inverter bridge may be short-circuited or open-circuited, resulting in the operation of the three-arm inverter bridge. Use an oscilloscope to observe the voltage drop waveform of the thyristor on the four bridge arms of the inverter bridge. If the voltage drop waveform of the thyristor on one bridge arm is a line, the thyristor has been through; if it is a sine wave, the thyristor has not been through. Replace the through thyristor; find out the reason why the thyristor is not turned on. 2. Fault phenomenon: when the heavy load cold furnace is started, all electrical parameters and sounds are normal, but the power cannot be raised, and overcurrent protection. Analysis and ...

阅读全文

Induction Furnaces

搜索此博客