跳至主要内容

Fire sleeve for induction furnace



Fire Sleeve for Induction Furnace


The fire sleeve is also called a high-temperature resistant sleeve, silicone rubber fiberglass sleeve. It is made of high-purity alkali-free glass fiber into a tube, and then the outer wall of the tube is coated with organic silica gel and vulcanized. After vulcanization, it can be used for a long time within the temperature range of -65°C-260°C and maintain its soft and elastic properties.


Fire sleeves can be used in high-temperature workshops. Many pipes, valves, or equipment have very high internal temperatures. If they are not covered with protective materials, they can easily cause burns or heat loss. The refractory bushing has better thermal stability and resistance to irradiation and thermal insulation than other polymer materials, preventing accidents, reducing energy consumption, and also preventing the heat of the medium in the pipeline from being directly transferred to the surrounding environment and making the workshop The temperature is too high, saving the cost of cooling. Moisture proof, oil proof, weather aging proof, pollution proof, and extend the service life of the equipment.


The cables and hydraulic pipes near the smoke arm of the intermediate frequency induction furnace are easily damaged due to the splashing of high-temperature molten steel. The fire sleeve of Beijing Great Pack Material Co.,ltd can effectively protect the hydraulic pipes and cables from high temperatures and is an economical high-temperature protection scheme for protecting the hoses and cables in the molten steel splash area.


标签：
地点: 29 Mirobod ko'chasi, Tashkent, 乌兹别克斯坦

评论

发表评论

此博客中的热门博文

Application Range of Medium Frequency Induction Furnace

  Application Range of Medium Frequency Induction Furnace (1) Intermediate frequency induction furnace is used for forging and rolling 1. Wheel forgings, ring forgings, shaft forgings, cylinder forgings, gear forgings, stainless steel forgings, and large flanges. 2. Hot heading of standard parts and fasteners, such as heating for tempering, forging, and extrusion of high tools. 4. Quenching and tempering of bar materials (2) Intermediate frequency induction furnaces are used for smelting 　 Including the smelting of steel, gold, silver, copper, and aluminum, especially in the foundry industry (3) Intermediate frequency induction furnace is used for heat treatment 1. Heat treatment of various hardware tools and hand tools. Such as pliers, wrenches, screwdrivers, hammers, axes, etc. 2. High-frequency hardened crank pins, sprockets, camshafts, valves, various rocker arms, rocker shafts for various auto parts and motorcycle parts; various gears, spline shafts, transmission axles, High-f...
发表评论
阅读全文

Induction Furnace Voltage

Induction Furnace Voltage The induced voltage of the intermediate frequency furnace often exists on the inductor coil, the furnace mouth plate, the water-cooled guide rail, and the furnace body bracket. So, what is the reason for the induction voltage of the induction furnace? Next, we will talk about the induced voltage of the intermediate frequency furnace. When the induction coil of the intermediate frequency furnace is working, when an alternating current passes through the coil, an alternating magnetic field is established in the space around the coil. An induced electromotive force is generated in the metal blank in the alternating magnetic field. We often regard the blank as a closed circuit with only one turn of the coil. When the induced electromotive force is generated, an alternating self-circulating circulating current—eddy current is generated in the circuit. Induction heating is to use the heat energy generated by this eddy current to heat the metal blank. The water-cool...
发表评论
阅读全文

Troubleshooting of Medium Frequency Furnace

Troubleshooting of Medium Frequency Furnace This article introduces the faults and solutions of medium frequency furnace. 1. Fault phenomenon: large DC current, low DC voltage, and if the voltage, dull equipment sound, over-current protection. Analysis and treatment: the thyristor with one arm of the inverter bridge may be short-circuited or open-circuited, resulting in the operation of the three-arm inverter bridge. Use an oscilloscope to observe the voltage drop waveform of the thyristor on the four bridge arms of the inverter bridge. If the voltage drop waveform of the thyristor on one bridge arm is a line, the thyristor has been through; if it is a sine wave, the thyristor has not been through. Replace the through thyristor; find out the reason why the thyristor is not turned on. 2. Fault phenomenon: when the heavy load cold furnace is started, all electrical parameters and sounds are normal, but the power cannot be raised, and overcurrent protection. Analysis and ...
发表评论
阅读全文