跳至主要内容

LF Ladle Refining Furnace LF-75t for Sale

Ladle Refining Furnace

LF Ladle Refining Furnace LF-75t for Sale


The LF ladle refining furnace is used for molten steel refining. The structure type is divided into the heating bridge, fourth column, cross arm rotation and large package rotary table for users to choose.

The LF ladle refining furnace equipment consists of the ladle, ladle car and streamer, furnace cover, electrode lifting mechanism, short net, water cooling system, hydraulic system, argon system, electric furnace transformer, high voltage cabinet, low voltage electrical and automatic control system, etc. Tonnage ranges from 10 tons to 300 tons.

Features  


1. The arc is heated and heated under normal pressure, the temperature is sampled, and the final temperature is precisely controlled to optimize the pouring temperature;

2. Synthetic slag refining, desulfurization, deoxidation, degassing, removal of inclusions;

3. Blowing argon gas at the bottom to make the temperature of the molten steel uniform, uniform and pure;

4. The alloy fine-tuning makes the composition control accurate, and the final chemical composition can be efficiently achieved by ferroalloy elements or aluminum or wire feeding;

5. With the feeding machine, the molten steel is desulfurized and deoxidized, the shape distribution of the inclusions is changed and the alloying elements are accurately controlled. At the same time, the alloy has a high yield, the molten steel temperature is small, and the environmental pollution is small;

6. As for buffering equipment between the primary refining furnace and the continuous casting machine, it is ensured that the primary refining furnace and continuous casting are matched to produce and the multi-furnace continuous casting is realized.

ladle furnace

Characteristics


1. The water-cooled furnace cover is equipped with a dust-removing interface that can adjust the length of the extended exit so that the furnace is always operated under a micro-positive pressure reducing atmosphere;

2. The copper-steel composite conductive cross arm is used to reduce the diameter of the electrode distribution circle and improve the service life of the lining;

3. Equipped with automatic or manual temperature measurement sampling device to accurately measure the temperature of molten steel;

4. The large current system adopts large-section water-cooled cable, compensator and copper-steel composite conductive cross arm to reduce the main circuit impedance;

5. Using alloy and slag automatic feeding device, accurately metering the alloy and slag in the bag;

6. Equipped with PLC control system and smelting model.





评论

  1. Roulette is one of the|is amongst the|is probably considered one of the} traditional casino video games loved by players on-line. A number of completely different variants are available, together with European and American. With a number of|numerous|a variety of} completely different choices in this area, Bovada Casino is properly value checking out. Consider Bonus T&Cs – Many players are drawn to a specific on-line casino due to its welcome bonus. While bonuses can present a superb platform to construct upon, that is solely the case when the phrases 원 엑스 벳 and circumstances are beneficial. Promos are {likely to|more probably to|prone to} be obtainable virtually day by day, but certain to|make positive to|remember to} solely take advantage when they're {worth the|well value the|definitely value the} investment, {in phrases of|when it comes to|by way of} both money and time.

    回复删除

发表评论

此博客中的热门博文

Application Range of Medium Frequency Induction Furnace

  Application Range of Medium Frequency Induction Furnace (1) Intermediate frequency induction furnace is used for forging and rolling 1. Wheel forgings, ring forgings, shaft forgings, cylinder forgings, gear forgings, stainless steel forgings, and large flanges. 2. Hot heading of standard parts and fasteners, such as heating for tempering, forging, and extrusion of high tools. 4. Quenching and tempering of bar materials (2) Intermediate frequency induction furnaces are used for smelting   Including the smelting of steel, gold, silver, copper, and aluminum, especially in the foundry industry (3) Intermediate frequency induction furnace is used for heat treatment 1. Heat treatment of various hardware tools and hand tools. Such as pliers, wrenches, screwdrivers, hammers, axes, etc. 2. High-frequency hardened crank pins, sprockets, camshafts, valves, various rocker arms, rocker shafts for various auto parts and motorcycle parts; various gears, spline shafts, transmission axles, High-f...

Induction Furnace Voltage

Induction Furnace Voltage The induced voltage of the intermediate frequency furnace often exists on the inductor coil, the furnace mouth plate, the water-cooled guide rail, and the furnace body bracket. So, what is the reason for the induction voltage of the induction furnace? Next, we will talk about the induced voltage of the intermediate frequency furnace. When the induction coil of the intermediate frequency furnace is working, when an alternating current passes through the coil, an alternating magnetic field is established in the space around the coil. An induced electromotive force is generated in the metal blank in the alternating magnetic field. We often regard the blank as a closed circuit with only one turn of the coil. When the induced electromotive force is generated, an alternating self-circulating circulating current—eddy current is generated in the circuit. Induction heating is to use the heat energy generated by this eddy current to heat the metal blank. The water-cool...

Advantages and Disadvantages of Electric Arc Furnace and Induction Furnace Steelmaking

Electric Arc Furnace VS Induction Furnace Steelmaking Comparison of advantages and disadvantages of electric arc furnace and induction  furnace steelmaking 1. The induction furnace heats up quickly and has high thermal efficiency. The heat is generated inside the charge (steel liquid), so the heating is fast. In the arc furnace, the heat of the arc after the material is cleared must be transferred to the molten steel through the slag, which is indirect heating. Thermal efficiency is poor. The furnace is in the shape of a basin, and a large part of the heat of the arc is lost through the furnace cover and the furnace wall. 2. The oxidative burning loss of elements in induction furnace steelmaking is less. Because there is no ultra-high temperature action of the arc in the induction furnace steelmaking, the burning rate of the elements in the steel is low. 3. In the induction furnace steelmaking, the composition and temperature of the molten steel are relatively unifor...